Copyright 2010. All Rights Reserved.
www.okinausa.com 21
REV122010-V17
II. IMAGE
i.
EXPOSURE MODE:
To adjust the shutter speeds.
AUTO:
Automatic Electronic Shutter
MAX SHUT SPD: adjust the maximum shutter speed; shutter will change
from 1/50(60) to maximum shutter speed automatically.
1/250
1/500
1/1000
1/2000
1/4000
1/10000
1/100000
MANUAL:
Adjust shutter manually.
SHUT SPD: adjust shutter speed.
1/60 Sec.,
1/100 Sec.,
1/150 Sec.,
1/200 Sec.,
1/250 Sec.,
1/300
Sec.,
1/350 Sec.,
1/400 Sec.,
1/450 Sec.,
1/500 Sec.,
1/600 Sec.,
1/700 Sec.,
1/800 Sec.,
1/900 Sec.,
1/1000 Sec.,
1/1300
Sec.,
1/1700 Sec.,
1/2000 Sec.,
1/2500 Sec.,
1/3200 Sec.,
1/4000 Sec., 21Steps
ii.
WHITE BALANCE
6 different modes to choose from, ATW, AUTO, MWB, ONE PUSH, 3200K or
6300K.
ATW (Auto Tracking White Balance):
This mode can be used within the color temperature range from 2,500°K to
9,000°K (eg, fluorescent light, outdoor, sodium vapor lamp or inside tunnels).
AUTO:
This mode computes the white balance value output using color information
from the entire screen. It outputs the proper value using the color
temperature radiating from a black subject.
MWB: (Manual White Balance)
MODE: 1~4
RED: select RED to adjust RED gain.
BLUE: select BLUE to adjust BLUE gain.
ONE PUSH:
The ONE PUSH WHITE BALANCE mode is a fixed mode that may be
automatically readjusted only at the request of the user.
ONE PUSH WHITE BALANCE SETUPS
*Press the SET button continually to adjust the WHITE BALANCE.
*Release the SET button, and the WHITE BALANCE will be set.
*Press the SET button again to exit.
3200K:
Indoor
6300K:
Outdoor
iii.
SHARPNESS:
The contour of the video image becomes cleaner and more distinguished as
the level of SHARPNESS increases. If the level goes up extremely, it may
affect the video image and cause noise. The available range is 0~15.
Restart the camera is required to save the new SHARPNESS settings.
After the settings are done, the camera will restart automatically.
