Copyright 2010. All Rights Reserved.
www.okinausa.com 19
REV122010-V17
EXTERNAL:
Use the external signal to switch COLOR/B&W.
INPUT: Select input level. D&N IN: It’s the PIN 4 external control connector.
(HIGH: OPEN or 5V; LOW: GND)
SCHEDULE:
When SCHEDULE is selected, timing can be set to switch
Day/Night Mode.
DAY/NIGHT: set the timing to switch from DAY/COLOR to NIGHT/B&W.
NIGHT/DAY: set the timing to switch from NIGHT/B&W to DAY/COLOR.
vii.
NIGHT LIGHT:
When IR LED is in use, select INFRARED. When regular illuminator is in
use, select NORMAL.
INPUT
SYSTEM
D&N IN
L LEVEL
H LEVEL
HIGH
COLOR B&W
LOW
B&W COLOR
