HI7-TKHBL_HI11-TKHBL_rev042709
3
1.
Lens Cap with Heater
2.
Temper Glass
3.
IR LED: 7pcs or 11pcs Super Power IR LED with Refractor
4.
IR Board and IR Board Bracket
5.
Universal IR Control Circuit Board: When the IR light turns on, it automatically adjusts the color to monochromatic
through the universal IR control circuit.
6.
Camera Bracket
7.
Power Supply Unit: 24V AC input, 60VA
8.
Blower and Blower Bracket
9.
Thermostat Switch
10.
Video Input BNC Male Connector: Connect to camera
11.
Video Out BNC Female Connector: Connect to monitor
12.
Terminal Board
13.
Fuse Holder: With 250V / 3.15A fuse
14.
AC IN Terminal block: 24V AC external power input
15.
OUTPUT_1 Terminal block: Plug and fix the power cable of camera
16.
OUTPUT_2 Terminal block: To power supply unit
17.
VR: Adjust VR to set Infrared LED activation level
Factory default 80% -- If there is not enough IR light, adjust the level to maximum 100%
18.
Thermostat Switch: Turns on at 35
C / 95
F and turns off at 25
C / 77
F for Blower
19.
Ground wire: To top cover
20.
12V DC Power-in jack: To camera / , outer-
When using a camera which requires a 24V AC power input, please run a separate power line to the camera
21.
Flying Bare Lead Wire: When the wire is not in use, cover it with the screw-on connector or tape the tip with tape to
prevent damages caused by the bare lead wire.
Содержание HI11-TKHBL
Страница 2: ...HI7 TKHBL_HI11 TKHBL_rev042709 2 PART DESCRIPTION...
Страница 8: ...HI7 TKHBL_HI11 TKHBL_rev042709 8...
