Okina USA SS10W-C100H, Руководство пользователя

Страница: 7 / 19

7
FUNCTION DESCRIPTION
1. Set Address Coding, Baud Rate, Control Protocol
Any operation commands the camera has its own objectives address coding,
baud rate, control protocol, a single camera only to respond with its own address
coding, baud rate, control agreement under the operation of the command.
Camera address coding, baud rate, control protocol specific settings please refer
to the DIP settings.
2. Target Tracking
Users can use the controls on the keyboard joystick control of the upper and
lower turning left and right cameras can be used to track moving targets or
moving horizon, while the focal length can be adjusted to change the perspective
of the size or the target image size. In the auto-focus of the state, with the lens
rotation, the camera will automatically adjust according to a rapid scene changes,
instantly get a clear picture.
3. Focal Length / Speed Automatic Matching Technique
Manual adjustment, the longer the focal length of the case, a reflection of
high-speed ball machine makes a slight touch screen joystick may move back,
resulting in data loss. Based on user-friendly design, intelligent ball according to
the proximity of the focal length of the camera automatically adjusts the
horizontal and vertical speed, so that manual operation is more simple and easy
to track targets.
4. Auto Turn Over
The operator will pull the bottom of the lens (vertical) after it is still holding down
the joystick, this time the level of the lens auto-rotated 180 ° turning up
immediately after the 90 °, can directly watch the back of the scene in order to
achieve the full 180 ° continuous vertical surveillance.
5. Set and Call Preset Position
Preset function is the current state of the ball under the PTZ function of the
horizontal angle, tilt angle and camera lens focal length, etc. position parameters
stored in memory, you need to call these parameters can be quickly and
PTZ cameras will be adjusted to that location. The operator can quickly and
easily by controlling the keyboard, infrared controller, control equipment such as
storage and call the preset point, the ball machine to support 256 preset points.
6. Lens Control
(1) Zoom Control
Users can control the keyboard or through the ball machine to adjust the focus of
the distance matrix of the host, receive the necessary panoramic images, or is a
fine view.
(2) Focus Control
System default auto-focus, zoom, the camera lens will be the center of the
screen features auto-focus, to maintain a clear picture; in exceptional
circumstances, the user can manually focus, achieve the desired image effect.
When in manual focus state, to restore the auto-focus, as long as the sway bar
can be restored remotely auto-focus. There is also a dedicated control
commands can be issued or to call an arbitrary way of restoring a preset bit
auto-focus.