Okina USA SS10W-C100H, Руководство пользователя

Страница: 10 / 19

10
OSD MENU SETTINGS
Power-On Self-Test
When power is connected to the dome camera, the camera in horizontal and vertical
direction movement, the screen will appear system-related information, the dome
camera self-test to complete the following diagram.
Display: PELCO-D protocol, Baud Rate 2400, Address Code 1
Preset point setting and calling
Set Preset points:
•
Selected camera (see manual control of the keyboard);
•
Operation Rocker, zoom button, focus button, buttons adjust the camera
aperture screen;
•
Press the number keys + PRESET (input designated preset) to preserve the
scene preset parameters.
Call preset points:
•
Selected camera;
•
Press the number keys (inputs the designated preset) + PREVIEW button, the
camera immediately move to the preset position, the lens zoom, focus and Iris
is also automatically change to the preset parameters; if the input is a special
function preset point (see "Preset Point menu"), the dome camera will perform
with special features preset point of the corresponding functions (such as:
Enter the 80th presets, the camera will perform auto-tracking feature).
Preset point function table:
Dial the 95
th
preset Enter main menu
Dial the 82
nd
preset Auto cruise
Dial the 83
rd
preset Clear all presets
Dial the 84
th
preset Use pattern scan 1
Dial the 85
th
preset Use pattern scan 2
Dial the 86
th
preset Use pattern scan 3
Dial the 87
th
preset Use patter scan 4
Dial the 96
th
preset 360-degree gap scan
Dial the 97
th
preset Scan between two presets
Dial the 98
th
preset Presets cruise
Dial the 99
th
preset 360-degree continuing scan
<MAIN MENU>
The dome camera power on and working properly, call the 95 preset points into the
main menu. Screen display as shown in the Table 3-1 below. (Note:<IR SETTING> is
for intelligent infrared dome camera special function)