Issue department
：
Bedding Division
Date
：
2021-10-11
Product Function
instruction
Author
：
BenYang
No
：
MC242
MC242
Version
：
1.1
Page 3 of 5
1.3.
TILT and Lumbar MOTOR
Connect to
TILT and Lumbar
actuator,control by remote single:
Click
bed up
button
，
TILT and Lumbar
actuator moves out
，
stop when released
；
Click
bed down
button
，
TILT and Lumbar
actuator moves in
，
stop when released
；
This function takes effect only by pressing the corresponding button on the remote.
1.4.
Massage
Connect to
Foot and Head
vibrator,control by remote single:
Click
ALL Massage
button,
Foot and Head
vibrator work,and click again,the strength enhance,there is 3
degree all.
1.5.
SYNC port
Connect with the same other Control box or Other accessories;
1.6.
Power LED & PAIRING LED
Power supply for control box, PAIRING LED of control box is blue, POWER LED is green
。
1.7.
Power
Connect to the 29V DC;
1.8.
RESET button
Press and hold the RESET button
，
the Head, Foot actuators will moves to lower position.
1.9.
Pair Function
Once power on
，
pairing LED turns on
，
the control box enters into mode of code paring
；
Press and hold the paring LED of Remote, the backlight of paring LED flashes, the backlight of remote flashes, the
remote enters into mode of code paring;
3
