OKIDATA Pacemark 3410, Руководство по обслуживанию

Страница: 210 / 308

7. Files do not print the way the printer menu and front panel are set.
Before sending a file to a printer, many word processors send an initialization
string. This string contains codes that reset the printer to a default set of
features. Otherwise, the printer might print using features set for a previous
job. The codes will override panel or menu settings.
Check the word processor’s manual to see if the initialization string can be
modified. If so, remove any codes that interfere with the printer’s settings.
To set the printer to ignore the reset code, follow this procedure.
1. Verify that the printer is loaded with paper and that the ribbon and
printhead are installed.
2. Verify that the printer is powered ON.
3. Press PRINT QUALITY and CHARACTER PITCH to enter Menu Mode.
4. The first Group/Item/Setting will print.
5. Press GROUP until SET UP prints.
6. Press ITEM until RESET INHIBIT prints.
7. Press SET until YES prints.
8. Press EXIT to exit the Menu Mode.
This will stop the reset code from resetting the printer, but other codes in the
initialization string may still override the printer Menu and / or front panel
settings.
8. Output is missing dots.
Check the headgap setting. Move the head gap lever to a lower setting.
Settings 1, 2, and 3 are for one or two part forms.
Settings 3, 4, and 5 are for three or four part forms.
Settings 6 - 9 are for envelopes and extra-thick paper.
Perform the Printhead Gap Adjustment. Refer to Section 3.3 of this Service
Handbook for details.
Refer to RAP 03.
Failure Analysis 4 - 12 Pacemark 3410 Service Handbook