OKIDATA Pacemark 3410, Руководство по обслуживанию

Страница: 177 / 308

Factory default settings are printed in Bold Italic.
Except as indicated, the menu for the Epson/IBM model is the same as the menu for the
ML/Pacemark model.
Group Item Setting Notes
Set-Up
(continued)
Operator Panel Function Full Operation
Limited Operation
Changing this setting to Limited
Operation deactivates the menu
mode and these control panel
buttons: TOP OF FORM,
MICRO FEED UP/DOWN,
PRINT QUALITY, and PITCH.
This is used in situations where
several people are using the
printer.
To restore to full operation,
power OFF the printer. Press
and hold PRINT QUALITY and
PITCH while powering ON the
printer.
The printer will be in Menu Mode.
Change this setting to FULL
OPERATION.
Reset Inhibit No, Yes Changing this to Yes prevents a
reset signal from the computer
from resetting the printer to its
defaults.
Print Suppress Effective
Yes, No
Determines whether the DC3
code causes the printer to ignore
data until a DC1 code is received.
Auto LF
No, Yes
Auto CR (IBM only) No, Yes
CSF Bin Select Bin 1, Bin 2 Only available when the dual bin
cut sheet feeder (CSF 3002) is
installed.
Determines which bin is active.
SI Select Pitch
(10 cpi - IBM ONLY)
17.1, 15 cpi Sets the pitch of condensed
mode from 10 cpi using the SI
code.
SI Select Pitch
(12 cpi - IBM ONLY)
20, 12 cpi Sets the pitch of condensed
mode from 12 cpi using the SI
code.
Time Out Print
(Epson/IBM)
Valid, Invalid When set to Valid, contents of
the buffer will print when
additional data is not received for
a predetermined amount of time.
Auto Select
No, Yes
Sensor Disable No, Yes
Pacemark 3410 Service Handbook 3 - 91 Maintenance