OKIDATA OKIPAGE 20 Скачать руководство пользователя страница 65

Страница: 65 / 88

Chapter 9: Problem Solving

E–57

Message:

PRINT DEMO PAGE

Meaning:

Demo page is printing.

Message:

PRINT FONTS

Meaning:

Typeface List page is printing.

Message:

PRINT MENU

Meaning:

Menu page is printing.

Message:

PRINTING

Meaning:

Data is being received and printed.

Message:

PROCESSING

.xxx

Meaning:

Data being received or processed. xxx = emulation

Message:

RESET

Meaning:

Manual reset was initiated. All temporary fonts and macros are
deleted.

Message:

RESET TO FLUSH

Meaning:

Printer was switched to off-line with data in buffer. Press RESET
to delete data.

Message:

RESET TO SAVE

Meaning:

Press

/Reset to save menu changes. Menu changes cannot be

reset automatically because data is present in buffer.

Message:

STACKER FULL

REMOVE THE PAPER

Meaning:

Rear paper exit bin is full. Printing is stopped until paper is
removed.

Message:

TONER EMPTY

REPLACE TNR CART.

Meaning:

Toner cartridge is virtually empty and must be changed to avoid
print deterioration.

Message:

TONER LOW

Meaning:

Appears on second line of display to indicate that toner is running
out. About 100 more pages can be printed after this message first
appears.

Message:

TONER SENSOR

Meaning:

Appears in second line of display to indicate that a malfunction of
toner sensor has been detected.

Message:

tttttt INSTALL

Meaning:

Tray tttttt is pulled out: reinsert tray.

Print Quality Problems

Before consulting a service representative regarding a print quality problem,
check the problems listed below to see if there is a solution, or something
you might have overlooked.

Blank sheets printed.

Reason:

Image drum cartridge may have been exposed to light, or LED
array or image drum contacts may have failed.

Solution:

Leave image drum cartridge in total darkness for several hours. If
this fails to restore it, install a new image drum cartridge.

Reason:

Empty or missing toner cartridge.

Solution:

Install new toner cartridge.

Entire page prints faintly.

Reason:

Empty toner cartridge. Pages get fainter after toner is used up.

Solution:

Install new toner cartridge.

Reason:

LED array is dirty.

Solution:

Clean the LED array.

Содержание OKIPAGE 20

























































































Результаты поиска

Содержание OKIPAGE 20

Отзывы:

Бренды по названию

Популярные бренды

OKIDATA OKIPAGE 20, Руководство пользователя

Результаты поиска

Содержание OKIPAGE 20

Отзывы:

Бренды по названию

Популярные бренды