OKIDATA OF1050, Руководство по обслуживанию

Страница: 84 / 449

TF No. No. Item Specifications Default
_________________________________________________________________________________
01 Service bit Switching serviceman/user operation. OFF
(0)
ON (1): Service personnel's features are available.
OFF (0): Service personnel's features are not avail-
able.
To enable or disable the following functions:
• Drum (Total) and toner counter clear
• Protocol dump
• Dial parameters
02 Line monitor control Changing the audible monitoring range. OFF
FP +04 (To select the loudness of monitoring) (0)
ON (1): Enable
OFF (0): Disable
Note: In case of transmission mode, the monitor
will be available during dialing, but the monitor will
be switched off automatically after the elapse of
specified time (about 5 sec.).
03 Error report (MCF) Enables or disables the automatic printing of the OFF
MCF: Message Confirmation message confirmation report upon a (0)
Report communicationerror.
ON (1): Printing the error report. An error report
which is different from FP No. 2 is printed
out for each single location.
OFF (0): Disable
04 Echo protection Enables echo suppression for poor lines with OFF
echo, usually during overseas transmission. (0)
This bit setting controls the following features.
Echo Protection OFF (0) ON (1)
Ignore 1st DIS OFF ON
CED-DIS timer 75 ms 1.5 sec
Tone for echo OFF ON
05 Off-hook bypass Allows two machines to be connected back to OFF
back for testing purposes. (0)