![background image](http://html.mh-extra.com/html/okidata/microline-ml395c/microline-ml395c_service-manual_3642329135.webp)
Page: 84
Service Guide ML395/395C
Chapter 3 Maintenance & Disassembly
3.3.08 Forms Tear Off
General Information
This feature (when activated) will automatically advance continuous feed paper to the tear-off position
after it finishes printing the last page in the document. A few seconds after the printing stops, the printer
will move the paper up to the tear-off position, aligning the perforation with the serrated edge on the
access cover. The operator will be able to tear off the last printed page without wasting paper or
readjusting the printer. When the printer receives data to print, it will automatically return the paper to the
top of form position for printing.
Forms Tear Off can only be used with continuous feed paper fed in from the rear on the built-in push
tractor. It CANNOT be used with the optional pull tractor.
NOTES:
Some programs, such as high resolution graphics packages, pause occasionally while sending data to the
printer.
If the pause lasts more than the selected interval, the paper will advance to the tear-off position until more
data is received.
No data is lost, but the extra paper movement causes uneven print registration.
If this problem occurs, disable (set to OFF) the Menu Setting for Forms Tear Off.
Procedure
1. Load continuous feed paper into the printer.
2. Verify that the ribbon is installed.
3. Power ON the printer.
4. Verify that the printer is ON-LINE (SELECT lamp is lit).
5. Press SELECT and place the printer OFF-LINE (SELECT will
not
be lit).
6. Press QUIET to enter Menu Mode.
7. The line shown below will print.
Printer Control Emulation Mode <current setting> 8. Press GROUP until the following line is printed.
General Control Graphics <current setting> 9. Press ITEM until the following line is printed.
General Control Forms Tear Off <current setting> 10. Press SET to change the menu setting for Forms
Tear Off.
Содержание Microline ML395C
