13. Remove the doctor blade assembly, taking off its position
and lifting forward.
14. Remove the OPC by lifting it up.
15. Use a vacuum to clean the roller shown without
removing it.
16. Assemble the components of the image unit, beginning
with the OPC.
OKIDATA B410
•
420
•
430 IMAGE UNIT & TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com
