![background image](http://html2.mh-extra.com/html/okidata/b410/b410_image-unit-and-toner-remanufacturing-instructions_3617063011.webp)
21. Install the end cap screws on the contact side.
Make sure they are firmly in place.
22. Install the cleaned PCR in place by slightly opening contact to allow it to enter the white side.
OKIDATA B410
•
420
•
430 IMAGE UNIT & TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com