manualshive.com logo in svg

OKIDATA 610e, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA 610e Скачать руководство пользователя страница 177

Diagnostics Test

C - 10

OL600e/610e/610e-PS/610e-S

Service Manual, P/N 59271602

C.2.2

Service Tab

•

This portion of the DOS Operator Panel is available to service personnel only.

•

At the DOS prompt, enter: OL600 \S. When the Operator Panel appears, click on Service or
press the ALT and e keys.

(1) Head Drive Time

•

Sets the drive time of the LED head using a scroll bar.

•

For setting instructions, see page 4-3.

(2) LED Array

•

Leave at default setting–2560 Dots.

•

Alternate setting is for future development.

(3) LED Wires

•

Leave at default setting–1 Wire.

•

2 Wire settting is for future development.

•

Incorrect setting  (2 Wire) causes two copies of the page image to be printed side by side.

(4) Climate

•

Adjusts fuser for environmental conditions.

•

Settings: +1 (default), 0, –1.

(5) Print Start Position

•

This setting is for shipping–do not change it.

(6) Market Place

•

Set at the factory for the region the unit will be shipped to:

ODA (US default): North & South America
OEL: Europe
Non-Europe 1: Australia
Non-Europe 2: Singapore, Far East

•

Must be set to ODA for proper default settings for language, symbol set, page size, etc.

•

If incorrectly set, menu page will read "OL600ex" or "OL610ex."

Содержание 610e































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды