OKIDATA 610e, Руководство по обслуживанию

Страница: 103 / 222

Troubleshooting
6 - 10
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602
Category Status message Trouble or status Remedy
Buffer overflow
REC BUFF
OVERFLOW
– OL610e/PS: Press RECOVER key to re-
lease the error display. Other models:
reinitialize the printer through the Status
Monitor.
– Change the setting of the host or printer so
the host can detect the busy status of the
printer. Resend the data from the host to
the printer.
– Replace the interface cable or control board.
– Press the operator panel RECOVER key to
release the error display.
– Install additional optional RAM board or
reduce the print data.
– Press the operator panel RECOVER key to
release the error display.
– Install additional optional RAM board or
reduce the DLL data.
– Press the operator panel RECOVER key to
release the error display.
– Install additional optional RAM board or
reduce the macros.
– Press the operator panel RECOVER key to
release the error display.
– Simplify page data formatting.
Table 6-1 (Cont'd)
(HP 4 mode)
PAGE BUF
OVERFLOW
(HP 4 mode)
The receive buffer is overflowing.
The page buffer is overflowing because it re-
ceived too much data for printing on the page.
The DLL buffer is overflowing.
Macro buffer is overflowing.
PRINT
OVERRUN
MACRO
OVERFLOW
(HP 4 mode)
DLL BUFF
OVERFLOW
(HP 4 mode)