Oki Pro9541WT, Руководство пользователя, Страница: 111 / 126

Table of control panel menu items
Appendix
Setting Up
2
B
efore use
1
Printing
3
Basic D
evice Oper
ations
4
Index
- 111 -
Admin Setup
Network Setup TCP/IP (Enable)
NetBIOS over TCP (Enable)
EtherTalk (Disable)
IP Address Set (Auto)
IPv4 Address (xxx.xxx.xxx.xxx)
Subnet Mask (xxx.xxx.xxx.xxx)
Gateway Address (xxx.xxx.xxx.xxx)
Web (Enable)
Telnet (Disable)
FTP (Disable)
IPSec (Disable)
SNMP (Enable)
Network Scale (Normal)
Gigabit Network (Disable)
Hub Link Setting (Auto)
Network Factory Defaults Execute
USB Setup USB (Enable)
Speed (480Mbps)
Soft Reset (Disable)
Serial Number (Enable)
Offline Receive (Disable)
Print Setup Copies (1)
Job Offset (Off)
Output Bin (Face Down)
Media Check (Enable)
A4/Letter Override (Yes)
Resolution (600dpi)
Toner Save Toner Save Level (Off)
Color (All)
Mono-Print Mode (Auto)
Default Orientation (Portrait)
Form Length (64 lines)
Edit Size (Cassette Size)
Trapping (Off)
X Dimension (210mm/8.3")
Y Dimension (297mm/11.7")
PS Setup
Network Protocol (RAW)
USB Protocol (RAW)
PDF Paper Size (Current Tray Size)
Color Setup
Ink Simulation (Off)
UCR (Low)
CMY 100% Density (Disable)
CMYK Conversion (On)
Spot Color (White)
Spot Color Printing (Enable)
Panel Setup
Near Life Status (Enable)
Near Life LED (Enable)
Idle Display (Toner Gauge)
Panel Brightness During Operating (31)
Panel Brightness While Power Save (1)
Panel Backlight Timer (30)
Front Lamp (Mode1)
Time Setup Date Format (yyyy/mm/dd)
Time Zone (+0:00)
*1
Daylight Saving (Off)
Time Setting (2000/01/01 00 :00)
*1
Power Setup Power Save (Enable)
Sleep (Enable)
Auto Power Off (Auto Config)
Continue to next page