Continuous Forms Printing
Command Structure
None
The printer locates the end of adhesive label by sensing the backing between
labels or through the use of an Eye-Mark (black rectangle on the reverse side
of the backing). It locates the end of a tag from a notch, eye-mark, or a hole be-
tween tags. Both sensors should be disabled when printing continuous forms by
sending the <ESC>CI0 command to disable the sensor (See page 96).
If you will be using continuous labels or tags, the printer must be told to stop
feeding in another manner. The length is determined by the position of the last
printed image on the label or tag. The printer will stop feeding when the field is
finished
printing.
The
length may be increased with printed spaces if necessary.
There is no command code to control label length.
29
All manuals and user guides at all-guides.com
all-guides.com