–
5a
–
3-2-
3
.
USB
Interface Cable
(1) Make sure the printer is turn
ed
off.
(2) A
ttach
the ferrite core to the cable as shown in
the illustration
(3) Pass the
cable
through the
cable support as shown
.
3-2-
4
.
Ethernet
Interface Cable
(1)
Make sure the printer is turn
ed
off.
(2)
Attach the ferrite core to the Ethernet cable.
(3
) Pass the fastener through the ferrte core.
(4) Loop the fastener around the cable and lock it.
(5) Use scissors to cu off any excess.
(6) Connect the cable to the interface board.
(7) Connect the other end to your computer.
