Oki OKIOFFICE87, Руководство по установке

Страница: 38 / 40

38 OKIOFFICE 87 Setup Guide
17 9/Space Key (One-Touch key 9): Use this key on the One-Touch
Keypad to enter spaces while programming. Unlike the Pause key,
spaces are used for easier reading only and have no effect on
dialing.
18 One-Touch Keypad: For a description of all the functions of the
One-Touch keypad, see the next section, “The One-Touch Keypad.”
below
19 One-Touch Labels: After programming a location into a One-Touch
key, write the location’s name on the One-Touch label. Lift off the
plastic cover above the One-Touch label, use a pencil to write in the
name, then replace the cover.
20 # Key: Once you have programmed some One-Touch keys or Auto
Dial numbers, use this key to create groups to allow you to send the
same fax to multiple locations. After you have loaded a document,
use this key to select the group you want to send your fax to.
21 0/UNIQUE Key: When dialing, use this key to enter a “0.” When
programming your Sender ID or a Location ID, you can use this key
to enter a variety of unique characters, including: ! @ \ “ _ % ~ # & ‘
( ) * + , - . / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø.
22 Numeric Keypad: When dialing, these 12 keys work just like the
keypad on a telephone. Also use the keypad to enter numbers,
letters and other characters while programming. After pressing the
Search key, you can also use the numeric keypad to alphabetically
search for the names of locations programmed into your MFP
machine.
23 * Key: If your MFP machine is set to pulse dialing, this key allows
you to switch the dialing operation of your MFP machine from pulse
to tone dialing during your current call. You can also use this key
while programming to create numbers with mixed pulse-then-tone
operation.