background image

Every effort has been made to ensure that the information in this docu-
ment is complete, accurate, and up-to-date. Oki Data assumes no re-
sponsibility for the results of errors beyond its control. Oki Data also
cannot guarantee that changes in software and equipment made by other
manufacturers and referred to in this guide will not affect the applicability
of the information in it. Mention of software products manufactured by
other companies does not necessarily constitute endorsement by Oki
Data.

Copyright 2001 by Oki Data Americas, Inc. All rights reserved.

Revised edition, September, 2001.

Written and produced by the Oki Data Training & Publications Depart-
ment. Please address any comments on this publication

by mail to:

or by email to:

Training & Publications Dept.

[email protected]

Oki Data Americas. Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620

For the latest product information, printer drivers, manuals, special offers,
etc., we welcome you to visit our  multilingual web site:

http://www.okidata.com

Year 2000 Compliance

All products currently sold by Oki Data are Year 2000 compliant. Each
product contains information technology that accurately processes date
and time data between the years 1999 and 2000, and carries no issue for
the September 9, 1999 (9999) programming concern. These products,
when used in combination with products purchased from other manufac-
turers, whose products properly exchange data and time information, will
accurately process the date and time. All future products are committed to
meeting the same Year 2000 compliance.

E

NERGY

 S

TAR

®

As an E

NERGY

 S

TAR

 partner, Oki Data has determined that

this product meets the E

NERGY

 S

TAR

 guidelines for energy

efficiency.

OKI and OKIOFFICE are registered trademarks/marques déposées/marcas registradas of
Oki Electric Industry Company, Ltd. E

NERGY

 S

TAR

 is a registered trademark of the United

States Environmental Protection Agency. Windows is either a registered trademark or a
trademark of Microsoft Corporation in the United States and other countries.

Содержание OKIOFFICE87









































Отзывы: