English
50
Programming
function is on, your fax machine will automatically
switch to power save mode after it has been idle for
three minutes. When this occurs, your display will
show: POWER SAVE MODE, PRESS“START” TO
EXIT. While in this mode, your fax machine will
automatically switch back to full operation after you
press the Start key, when the telephone rings, when
the telephone handset is lifted, or when a document
is loaded. Available settings are on and off.
20 ECM FUNCTION:
The error correction mode
function helps your fax machine to improve
communication in areas where telephone line
conditions are poor. Available settings are on and off.
21 REMOTE DIAGNOSIS:
The remote diagnostics
feature allows a service person to remotely dial and
service your fax machine. Available settings are on
and off.
22 PC/FAX SWITCH:
If the PC Interface option is
installed, your fax machine automatically transfers
received faxes directly to the PC (and does not receive
and print them itself). However, if there is a problem
with the PC interface option and this function is set to
ON, then the fax machine will automatically receive
and print any messages. If this function is set to OFF
there will be no reception.
23 ONE TOUCH PARAM:
This function allows you
to make changes to the communications settings for
a specific One Touch key, without changing the
normal communication settings used by your fax
machine. See One Touch Parameters in the Dial
Directories chapter.
Changing Your User Function Settings
1
Press the Select Function key.
2
Press the 9/User Program One Touch key.
The display will show 1:FUNC. PROGRAMMING.
3
Press the Yes
key. The display will show
FUNCTION NO. [ ].
4
Using the numeric keypad, enter the 2-digit number
of the function you want to change. This display
will show the name of the selected function.
5
Repeatedly press the No
key until the setting
you want appears in the display.
Tip:
If you are changing your fax machine’s TX MODE
DEFAULT settings, the new settings will appear on the
LEDs above the Transmit Resolution/Yes
and the
Type of Original/No
keys
6
Press the Yes
key to confirm your selection. The name
of the next function setting will appear in the display.
7
Press the Select Function key to finish.
Содержание OKIOFFICE 44
Страница 1: ...OKIOFFICE 44 Handbook English...
