Page: 41
Service Manual for OF5800
Chapter 3 Adjustment Procedures
These switches are used to program internal machine parameters. The primary back up battery maintains
these settings if power is lost.
1. From standby, press PROGRAM, *,0.
2. Press ENTER.
3. Select the desired parameter by pressing a one-touch key plus a number on the keypad. For example,
to access parameter B:1,press "B" plus the number "1" on the numeric keypad.
4. Press ENTER.
(The bits are numbered 7 through 0. Bit 7 is left most bit.)
5. To navigate through the Parameter settings:
Press "<" key to move the cursor to the left.
Press ">" key to move the cursor to the right.
Press the 0 or 1 on the numeric keypad to change the bit value.
Press ENTER to save the setting of the displayed Parameter and advance to the next Parameter.
(Continue pressing ENTER until the desired Parameter is shown in the display. Be sure to press ENTER
after each Parameter is programmed to save the new setting.)
Press STOP to return the unit to standby.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
