Page: 163
Service Manual for OF5800
Chapter 4 Troubleshooting Procedures
The error messages on Check Message printouts indicate the following:
Here's a brief summary:
Error Message
Possible Meanings
Check condition of remote fax
Remove machine malfunctioned
No handshake signals from remote machine
Wrong phone number reached
Repeat transmission
Poor phone line conditions prevented communication
No handshake signals from remote machine
Document misfeed or miscount
Unable to reach remote machine after attempting
specified number of redials
Line is busy
Remote machine was busy
Remote machine didn't answer
Check receive documents
Receive confirmation signal not received from remote
machine
Poor line conditions caused a poor image
Memory Full
Remote units memory capacity has been exceeded.
Dialing number is not set
An autodialer number is not stored/programmed
properly
Stopped
The STOP key was pressed at the remote fax during
the handshake.
Message Area is Blank
Someone pressed STOP during communication
Printer error occurred during communication
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
