3 - English
Safety Information, 220/240-
Volt Models
This product has been carefully designed to give years of
safe, reliable performance. As with all electrical equipment,
however, there are a few basic precautions that should be
taken to avoid injury or damage:
Ensure this and all other documentation is both read carefully and
retained for future reference.
Ensure all warning and instruction labels on the product are read,
understood and followed in order to prevent any risk of injury.
This product may be heavy. Please check the weight of the product
and take all necessary precautions to prevent the risk of personal
injury.
The product must be placed on a flat solid surface strong enough to
support its weight to prevent any risk of injury.
Ensure that there is adequate ventilation all around the product to
prevent overheating and any risk of fire.
Keep the product away from direct heat sources such as radiators
and out of direct sunlight to prevent any risk of overheating.
The power supply required for this product is 220-240 VAC, 50/60
Hz. (For any DC powered product, the figures are 9.6-31.2VDC, 4-
1.8A.) Refer to your product's rating label on the machine for full
power rating details. Ensure that you have a suitable power supply
before connecting the product. If in doubt contact your dealer or
check with your local power provider.
Ensure both the product and mains power switches are in the OFF
position before connecting the AC power cable.
Do not connect or disconnect the power plug with a wet hand as
this may cause electric shock.
Always hold the power plug to connect/disconnect the power cable
to/from the mains socket. Unplugging by pulling on the cable can
cause fraying and may lead to fire or electric shock.
This product has an earthed plug as a safety feature and will only
connect to an earthed socket. Do not attempt to defeat the
earthing or there is a risk of fire or shock.
If using an extension cable or power strip ensure that the total
current rating (amperes) of all connected equipment is less than
the maximum rating of the extension cable, power strip or wall
outlet. If the product is already supplied with a fitted power strip
then no additional power strip or extension cable should be used to
connect to the mains wall outlet. Otherwise, fire or shock may
occur.
Ensure the power cable is routed so as not to be damaged or cause
a trip hazard. If the cable becomes frayed or damaged replace it
immediately to prevent any risk of shock.
Do not twist, constrict or knot the power cable as this can cause
overheating which may lead to fire or electric shock.
Ensure the power socket to which the product is connected is easily
accessible at all times and not obstructed.
Use only the power cable supplied. Using a power cable not
intended for this product may lead to fire or electric shock.
To avoid risk of fire and electric shock, do not use the power cable
supplied with this product for any other electrical equipment.
If you do not connect the power cord or any other cables only as
directed in the User's Guide, this may result in a fire.
It is recommended that the machine is switched off prior to opening
covers otherwise there is a risk of electric shock.
When the product cover is open, do not touch the fuser unit or print
head as you may receive burns. Allow it to cool before touching.
If the product casing gets extremely hot or smoke, unusual smells
or abnormal noises are emitted from the product, there is a risk of
fire. Unplug the mains connector and contact your dealer.
If the product has been knocked over or damaged, there is a risk
of electric shock, fire and/or injury. Unplug the mains connector
and contact your dealer.
If any liquid (for example water) is allowed to enter the product,
there is a risk of fire. Unplug the mains connector and contact your
dealer.
Do not place containers containing liquid on the product as electric
shock, fire and/or injuries may occur.
If any foreign objects (for example clips) are allowed to enter the
product, there is a risk of electric shock, fire and/or injury. Unplug
the mains connector before removing the object.
Do not introduce foreign objects into the ventilation holes or
operate this product with any covers open or doors removed as
electric shock, fire and/or injuries may occur.
Do not use an extremely flammable spray near the product as the
product contains high temperature parts that may cause a fire.
Switch the product off before cleaning to prevent any risk of injury.
Clean using a damp cloth. Do not use liquid or aerosol cleaners.
Ensure loose clothing and hair is kept clear of moving parts when
the product is in operation to prevent possible risk of injury.
Do not carry out any operations on the product that are not
specified in the User's Guide. This may result in electric shock, fire
and/or injury.
Do not touch the battery if one is fitted to the product. There is a
risk of explosion if the battery is replaced by an incorrect type. The
product battery should not require replacement during the life of
the product.
Do not throw toner cartridges or image drum cartridges into a fire
as you may receive burns from a dust explosion.
After installing additional memory, hard disk drive, or any other
internally fitted option, any covers removed or doors opened must
be closed or replaced and secured to prevent risk of fire.
The acoustic noise of this product is less than 70 dB (A) as
measured in accordance with EN ISO 7779.
The operating condition range for your product is: 10 to 32°
C and
20 to 80% RH. Operation of the product outside this range could
result in damage to the product.
If a scanner, finisher etc. is fitted, exercise care when moving these
items so as to avoid risk of entrapment or personal injury.
If the product is installed on a cabinet or high capacity feeder,
ensure wheel locks are applied once placed in final position for use,
to prevent risk of movement or injury.
