ML7065-033 User’s Manual
Chapter 8 Electrical Characteristics
61
8.3 Supply Current Specification
(See “Power supply voltage condition (*9)”, Ta = –25 to +70°C)
Parameter Symbol Condition Min. Typ. Max.
Unit
I
DDS
Total-stop state (*10)
2
µA
I
DD1
Sleep state (*10)
2
µA
I
DD2
Suspended state
(*10)
2
mA
I
DD3
Idle
state
(*10)
9
mA
I
DD4
“Receiving” state
(*10)(*11)
57
mA
Supply current
I
DD5
“Transmitting” state
(*10)(*11)
56
mA
*10: The standard conditions are when V
DDIO
= 3.0 V and V
DDCORE
= V
DDRF
= V
DDANA
= 2.5 V.
*11: These values may be exceeded depending on the operation of the MCU used along with the ML7065.
These values apply when the SCI interface clock, SCLK, is 2 MHz.
Each value in the table above is a value for a single LSI device.
If RF operation is performed at the time the board is installed, current flows through peripheral components (10
to 20 mA).
Values in the receiving state and the transmitting state indicate the current values when the RF, PHY, MAC, and
the SCI block operate.
