Oki ML3390, Инструкция по установке и эксплуатации

Страница: 36 / 45

22 ML3390/91
This feature is normally turned off. To activate it: Note: Some programs pause occasionally while sending
data. If the pause is too long, the paper will advance
to the tear-off position until more data is received.
This extra paper movement can cause uneven print
registration in graphics. If you have this problem,
use the menu to turn off this feature.
Paper Park Feature
1. Press SHIFT (
➋
) + SEL (
➊
).
2. Press GROUP (
➌
) until one of the following lines
appears, depending on which paper feed you are using:
REAR FEED Form Tear-Off OFF
BOTTOM FEED Form Tear-OFF OFF
3. Press SET (
➍
) consecutively until the time interval you
wish to select appears in the third column.
4. Press SHIFT (
➋
) + SEL (
➊
) to exit Menu Mode and
save the setting.
To retract rear-feed paper form the paper path, press PARK (
➊
).
QUIET PARK TEAR FF/LOAD
LF
SEL
SEL
POWER ALARM MENU
GROUP EXIT ITEM SET
PRINT
MENU SHIFT TOF
Micro Feed
Up
Micro Feed
Down
➋
➌ ➊
➍
QUIET PARK TEAR FF/LOAD LF
SEL
SEL
POWER ALARM
MENU
GROUP EXIT
ITEM SET PRINT
MENU
SHIFT TOF
Micro Feed
Up
Micro Feed
Down
➊
3390hlp3.pm6 22/03/96, 16:05 22