Oki ES8453 MFP, Руководство пользователя

Страница: 545 / 1267

Setting TAD Mode
Set an operation type in Ans/Fax Ready mode.
1.
Press [Device Settings] on the touch panel.
2.
Press or several times and press [Admin Setup].
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [Fax Setup].
5.
Press [Fax Setting].
6.
Press [TAD Mode].
7.
Select a type.
[Type 1]: Fax signal detection starts immediately after the answering
machine/telephone responds. If the sender is sending a fax, the fax reception starts
automatically.
When the answering machine finishes responding, the fax reception starts.
If there is a problem with a fax reception, using this type may improve the problem.
[Type 2]: Fax signal detection starts immediately after the answering
machine/telephone responds. If the sender is sending a fax, the reception starts
automatically.
Even after the answering machine finishes responding, the fax reception does not
start.
If you usually receive calls, use this type.
[Type 3]: Fax signal detection starts in 15 seconds after the answering
machine/telephone responds. If the sender is sending a fax, the reception starts
automatically.
When the answering machine finishes responding, the fax reception starts.
Use this type for normal use.
8.
Press [Back] until the home screen is displayed.
544