4
4-70 Performing Setup from the Printing Unit Control Panel
ES3640e MFP EFI Configuration Guide - 70
Ignore EOF Character
Yes/No [Yes]
This option appears only if Enable Parallel Port is set to Yes. This
option specifies that the Fiery should ignore end-of-file (EOF)
messages in a file. This option must be set to Yes to print Post-
Script files in binary format (not ASCII); under normal circum-
stances, it should be set to No. When this option is set to Yes, the
Fiery uses the parallel port timeout value to determine when the
end of the file has been reached. If you experience printing prob-
lems, set this option to No.
Protocol Setup options
AppleTalk Zone
List of zones
The Fiery searches the network for AppleTalk zones in your net-
work segment. Scroll through the list to select the AppleTalk zone
in which you want the Fiery to appear. If your segment has only
one zone, the Fiery is assigned to that zone automatically.
The message “No AppleTalk zone found” may mean your network
has no zones, or the network cable is not connected (see
).
To configure the Fiery, choose each protocol and enter the settings for
that protocol. You can enable AppleTalk, TCP/IP, and IPX/SPX
communication simultaneously.
Network Setup
Protocol Setup
AppleTalk Setup
Enable AppleTalk
Yes/No [Yes]
Select Yes if you have an AppleTalk network connected to the Fiery.
This setting enables the Fiery to communicate over AppleTalk
networks.
