Oki ES2232a4, Руководство пользователя

Страница: 35 / 103

Menu functions > 35
PCL
EMULATION
This menu controls settings effective when the printer is
operating in PCL emulation mode.
JAM RECOVERY ON
OFF
Specifies whether the printer should
perform jam recovery after a paper jam
has occurred. If ON, the printer will
attempt to re-print any pages lost due
to a paper jam once the jam has been
cleared.
ERROR REPORT ON
OFF
If ON, the printer will print error details
when a PostScript Emulation error
occurs.
Note: Applies to PS & PCL XL only.
ITEMS SETTINGS EXPLANATION
FONT SOURCE RESIDENT /
RESIDENT2
DOWNLOADED
Specifies the location of the PCL default
font. Normally this will be INTERNAL
unless additional fonts are installed in
the expansion ROM slot or additional
fonts have been downloaded to RAM as
permanent fonts.
FONT No. I0 / C001 /
S001
Sets the current default font number
from the currently selected source,
which could be internal (I), ROM slot
(C) or downloaded (S).
FONT PITCH 0.44CP!~
10.00CPI ~
99.99CPI
Sets the width of the PCL default font in
characters/inch (CPI).
Default font is the fixed-pitch, scalable
font. The value is displayed to the
second decimal place
Displayed only when the font selected
in Font No. is fixed-spacing, scalable
font.
FONT HEIGHT 4.00
POINT~ 12.00
POINT ~999.75
POINT
Point size of selected font.
The value is displayed to the second
decimal place
SYMBOL SET PC-8
(Default Symbol
Set only shown)
PCL symbol set. If the font source and
number are changed to one which does
not support the selected symbol set,
this must be changed to an available
symbol set for that font.
ITEMS SETTINGS EXPLANATION