Oki DP-5000 Metallic and Colour Desktop Printer, Руководство пользователя

Страница: 94 / 123

86 User’s Guide
Paper is not feeding or ejecting correctly from
the sheet feeder
1 Are you using paper which is thicker or thinner
than recommended?
Use paper within the range 0.07 mm - 0.23 mm
(0.003" - 0.01"). For auto feeding use paper in the
range 0.07 mm - 0.1 mm (0.003" - 0.004").
2 Are you using poor quality paper?
Paper that is folded, ripped or has holes, such as
loose leaf binder or refill paper, can cause paper
jams and should not be used.
3 Are you using curled paper?
This will cause paper jams. The paper should be
curled the opposite way to flatten it out before it
is used.
4 Are you using paper with folded or cut corners?
This can cause problems since the paper position
sensor and paper length sensor do not work prop-
erly. Sheets with corner cuts, such as transparen-
cies and back print film, will work fine if the
corner cut end is placed at the top of the paper
guide.
5 Is the cut corner in the correct position?
When these sheets are inserted with the cut corner
incorrectly positioned, they may not feed cor-
rectly.
6 Is the paper feed guide too narrow for the paper?
The paper feed guide should hold the paper
loosely enough so that it can feed easily.
7 Is there too much paper in the sheet feeder?
The sheet feeder can hold up to 100 sheets of
plain paper, or 30 transparencies, any more than
this may cause a paper jam.
8 Is the paper feed switch positioned correctly for the
paper feed method?
To print on plain paper using automatic feed
mode, set the paper feed switch to position “A”;
to print in manual feed mode, set it to position
“M”.
9 Are you printing on envelopes, thermal paper, or
picture postcards?
Correct printing and feeding of envelopes and
thermal paper cannot be guaranteed. The back
side of picture postcards can be used if the card is
less than 0.23 mm (0.01") thick and manual feed