Oki DP-5000 Metallic and Colour Desktop Printer, Руководство пользователя

Страница: 59 / 123

English
Chapter 5 - Specialised Printing Operations 51
Note 1:
Some applications make internal adjustment to pro-
duce the displayed colour components. In such cases,
the colour components cannot be restricted and there-
fore foil colours cannot be used. When using such an
application, use the Overlay mode.
Note 2:
There are a small range of colour component values
which are close to a foil colour. These colours will be
interpreted by the printer as indicating foil colours and
will be printed in the respective foil colour.
Install ink cartridges
Install all the ink cartridges specified in Requirements
into the ink cartridge holders, including VPhoto Primer
ink for undercoating. Simultaneous full colour plus foil
colour printing is possible by exchanging ink cartridges
when the corresponding message is displayed.
Load the paper in your printer
The method used for loading paper depends on the pa-
per type used.
Set up the printer driver for printing
1. Select
Print
from the File menu to open the Print
dialog box, then click Properties .
2. Click the
Document/Quality
tab to bring to the
front.
3. Select Automatic, Photographs , or Graphics/
Text
from the
Document Type
.
4. Set
Media Type
depending on the paper used.
5. Make any other necessary changes to the settings.
6. In
Print Settings
click
Use Spot Colours
check
box so that the
Spot Colours
dialog box is dis-
played.
7. In Spot Colour Settings click the Use Foil Col-
our(s)
radio button.
8. Set
Print Using
to
Metallics & CMYK Inks.
9. Enabled ink cartridges among those installed in
the printer are displayed in
Select Ink Car-
tridge(s).
Click the radio button(s) of the ink car-
tridge(s) to be used.
Note 1:
Even though you have set the colour of an area to your
desired colour in your application, the area will not be