Oki CX4545 MFP, Руководство по факсу

Страница: 30 / 48

3 SETTING OPTIONS
28 Setting up the Fax Driver Options
2) SNMP V1/V2
Community Name — If a community name other than “private” (default) is set for the SNMP community name for your
OKI MFP, enter its community name.
 To send fax jobs normally under an SNMP V1/V2 environment, the SNMP community names must be the same
in the 3 settings shown below. For help, ask your administrator.
- Your OKI MFP
- [SNMP Settings] dialog box of the [Sender Information] tab
- TCP/IP port of the [Ports] tab in the Fax driver
 To change the community name, the administrator privilege is necessary. You must log in with the
“Administrator” privilege and open the printer driver properties.
 Up to 31 characters including the following symbols can be entered for the Community Name.
! " # $ % & ' ( ) * + , - / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
3) SNMP V3
If SNMP V3 is enabled, select one of the following items to set how users are authenticated.
User ID File — Select this option when you want to use a user ID file. Click [Browse] and specify the user ID file.
User Name/Password — Select this option when you want to use the user name and password. When this option is
selected, keyboard or select the following items:
- User Name
- Authentication Protocol
- Authentication Password
- Privacy Protocol
- Privacy Password
 If you select to enable SNMP V3, consult your network administrator for preliminary advice on how to
authenticate users.
 Up to 31 characters including the following symbols can be entered for each of the User Name, Authentication
Password and Privacy Password.
! $ % & ' ( ) - , < > @ [ ] ^ _ ` { } ~
4) [Restore Default]
Click this button when you want to reset all the settings back to the defaults.