Oki CX4545 MFP, Руководство оператора

Страница: 21 / 116

2.SENDING/RECEIVING A FAX
Sending a Fax 19
2 SENDING/RECEIVING A FAX
 Placing the original(s) on the RADF
This section describes how to set the original(s) on the RADF (Reversing Automatic Document Feeder, optional). When
the originals are placed on the RADF, the uppermost page is the first to be scanned and sent.
1
After aligning the originals, place them with their face up and slide the guides to rest
against the edges of the originals.
 Regardless of their sizes, originals are acceptable up to 100 sheets (35 to 80 g/m
2
(9.3 to 20 lb.)) or 16 mm
(0.62") in height.
 2-sided originals can be set and sent.
 P.50 “Transmitting 2-Sided Originals”
 When an original of any size other than LT/A4 is placed in the direction shown in the above left figure,
transmission to a recipient is carried out so that the pre-entered sender information is printed in position A in the
figure.
 When an original of LT/A4 size is placed in the direction shown in the above right figure, transmission to a
recipient is carried out so that the pre-entered sender information is printed in position B in the figure.
 The pre-entered sender information shows what is registered in the Terminal ID.
 P.97 “Registering the terminal ID”
A
B