Faxing > 111
4.
Touch the Properties tab.
Select from the following features as required:
5.
Place the document to be scanned on the scanner unit glass or ADF.
6.
Press the START button.
C
ONFIRMING
FAX
TRANSMISSION
You can check fax transmission status from:
FAX Log: To print this report, press the SETUP button on the scanner unit control panel
then press the Report button followed by the Print button associated with the FAX Log
Report.
NO.
FEATURE
OPTIONS
DESCRIPTION
1
Original Size
Auto, 8.5x11,
8.5x11R, 8.5x13,
8.5x14, A4, A4R
Allows you to select the scanned
document size.
2
Resolution
Standard, Fine,
Photo
Allows you to specify the scanning
resolution for the document. This allows
automatic (pre-set) optimization of
image quality settings.
3
Sides
Single, Top / Top,
Top / Bottom
Allows you to define simplex or duplex
and the duplex orientation of front and
back sides of a page for scanning.
4
Lighter/
Darker
Lighter / Darker
-5 to +5 by 1
Allows you to select the brightness level.
5
Tx Time
Enter transmit time
Allows you to enter (via the Soft
keyboard) a delayed fax transmit time.
NOTE
If you specify Auto for Original Size, the MFP automatically selects the paper
size to match the original document. However, depending on the document
conditions (for example, if the background density is high), document sizes
may not be detected automatically. In this case, specify the document size
manually.
1
2
3
4
5
