SETTING UP YOUR MACHINE > 21
As part of the warm up message, the Scancopier LCD display
shows the installed C9000 Firmware version number and the
installed Colour Table version number.
At the end of the warm up message, the LCD display shows the
system default values in readiness for copying.
NOTE
The default installed Colour Table is for the C9500 printer. If your
Scancopier is to be used with a C9200, C9300 or C9400 printer you will
have to install the corresponding Colour Table from the CD supplied
with your Scancopier. Full instructions on how to do this are supplied on
the CD.
NOTE
You can leave your Scancopier ON at all times since it incorporates a
power saving function. If the Scancopier is idle for 4 hours, it
automatically shuts off the scanning lamp.
Содержание C9500dxnccs
Страница 1: ...C9000 Scancopier USER S GUIDE...
