Oki Data CONFIDENTIAL
44043511TH Rev.2
196 /
Table 7-1-1 Operator Alarm (8/9)
Display
Cause
Error Description and Analysis
Judgement
Remedy
Insert paper
TRAY
MEDIA SIZE
Please see
HELP for details
Cassette 1, 2, 3, 4or 5 has
been detected to be Out-Of-
Paper
1) Check and see if the specified
cassette is out-of-paper.
2) Check and see if the out-of-paper
sensor activator is normal.
Yes
No
Put paper in specified cassette.
Replace the corresponding out-
of-paper sensor.
Replace Fuser
Fuser Counter
Exceed Life
1) Is an Error message displayed?
2) Is this immediately after the fuser
unit was replaced?
Yes
No
Check the Fuser Unit Life.
Replace the fuser immediately or
at the next maintenance.
Tray*Paper
Almost Finished
Paper Near-End Detection
Is the tray paper level low? (less than
about 30 sheets)
Yes
No
Refill with paper.
Check Paper Near-End Sensor.
File system
access error
<n>
Cannot write to HDD.
Is there any error in the operational
procedures?
No
Yes
Check the manual usage
procedures.
HDD malfunction.
Replace HDD.
Power Off/on
910: Error
to
914: Error
GDDC Error
910 :Tray1 GDDC Error
911 :Tray2 GDDC Error
912 :Tray3 GDDC Error
913 :Tray4 GDDC Error
914 :Tray3 GDDC Error
Check to confirm that the tray is
mounted correctly.
Replace the geared motor of the
tray.
Power Off/on
917: Error
Belt Slit Sensor Error
The belt is not running properly.
Does the error message still appear
after rebooting?
Yes
Check to confirm that the belt is
mounted correctly.
Replace the belt.
Power Off/on
918: Error
Duplex FAN0 Alarm
Detection
Error of the fan in the duplex unit
Does the error still occur after
rebooting?
Yes
Yes
Check to confirm that the duplex
unit is mounted correctly.
Check the connection of the fan.
Replace the fan.
Power Off/on
919: Error
Duplex 24V Abnormal
Current Detection
24 V of power is not supplied to the
duplex unit properly.
Does the error still occur after
rebooting?
Yes
Yes
Check to confirm that the duplex
unit is mounted correctly.
Check the connection of the fan.
Replace the fan.
Power Off/on
920: Error
Yellow Image
Drum Lock Error
The Y ID unit is not operating properly.
Does the error message still appear
after rebooting?
Yes
Yes
Check to confirm that the Y ID
unit is in position.
Replace the Y ID unit.
Replace the Y ID motor.
Power Off/on
921: Error
Magenta Image
Drum Lock Error
The M ID unit is not operating properly.
Does the error message still appear
after rebooting?
Yes
Yes
Check to confirm that the M ID
unit is in position.
Replace the M ID unit.
Replace the M ID motor.
Power Off/on
922: Error
Cyan Image Drum Lock
Error
The C ID unit is not operating properly.
Does the error message still appear
after rebooting?
Yes
Yes
Check to confirm that the C ID
unit is in position.
Replace the C ID unit.
Replace the C ID motor.
Power Off/on
923: Error
Black Image Drum Lock
Error
The K ID unit is not operating properly.
Does the error message still appear
after rebooting?
Yes
Yes
Check to confirm that the K ID
unit is in position.
Replace the K ID unit.
Replace the K ID motor.
Power Off/on
924: Error
Tray2 24V
Abnormal Voltage Detection
24 V of power is not supplied to tray 2
properly.
Check to confirm that tray 2 is
mounted correctly.
Power Off/on
925: Error
Tray3 24V
Abnormal Voltage Detection
24 V of power is not supplied to tray 3
properly.
Check to confirm that tray 3 is
mounted correctly.
Power Off/on
926: Error
Tray4 24V
Abnormal Voltage Detection
24 V power is not supplied to tray 4
properly.
Check to confirm that tray 4 is
mounted correctly.
Power Off/on
927: Error
Tray5 24V
Abnormal Voltage Detection
24 V of power is not supplied to tray 5
properly.
Check to confirm that tray 5 is
mounted correctly.
Power Off/on
928: Error
Fuser Motor Lock Error
The fuser is not operating properly.
Does the error still occur?
Yes
Yes
Check to confirm that the fuser is
in position.
Replace the fuser.
Replace the fuser motor.
Power Off/on
929: Error
Waste Toner Transfer Motor
Lock Error
The waste toner transfer motor is not
operating properly.
Does the error still occur?
Yes
Check to confirm that the waste
toner transfer system is operating
properly.
Replace the waste toner motor.
Содержание C910
