manualshive.com logo in svg

Oki C7500n, Руководство по обслуживанию

Поделиться
Скачать
Oki C7500n Скачать руководство пользователя страница 97

41955801TH  Rev.8

97 /

Oki  Data  CONFIDENTIAL

3.4

Paper Thickness Detection Sensitivity Adjustment  and Media Thickness Detection
Value Check

Outline:

The sensitivity of a micro displacement sensor used for detecting media thickness varies from
one to another.  Therefore, to ascertain the sensitivity in advance, check the output value of
the sensor by passing media of known thickness through the printer equipped with the sensor.
The sensitivity is fixed based on the output value.

Adjustments must be made when the paper thickness sensor, the registration roller and the
PU board are replaced.
By passing, from the multipurpose tray, four sheets of paper whose thickness has been
measured with a micrometer (MDQ-30M, MDQ-30), the correction value for media thickness
sensitivity is automatically set with the first three sheets.  Check the media thickness detection
value with the fourth sheet.
Media:  Transparency (42404301)
Paper thickness difference:  Within 

±

10

µ

m

3.4.1

Applicable Operating Systems and Interfaces, and File Required

I/F

Centronics

USB

Centronics

USB

File Type

No file required

USB driver

No file required

File Name

No file required

Oki USB Driver for 

Win98.exe

No file required

Remarks

The interface port must be checked for its 
bidirectional setting.

With the insertion of a USB, installation screen 
display is provided.

Inapplicable

OS

Win9x Series
(95/98/Me)

Win2000/XP

Software:  AdjustmentMM.exe (Ver. 1.12)    File Required:  Opusbase.dll

Note:

For use of a Centronics interface, the interface port must be checked for its bidirectional
setting.

Checking:  Check the parallel port is set to bidirectional in the BIOS setup (Parallel Mode
parameter: Bi directional.  No ECP/EEP).

Note:

BIOS setup and program words vary with personal computers.  Be sure to refer to the user
documentation for the PC used.

(Example for NEC PCs)

(1)  Power on the PC.
(2)  POST (Power On Self-Test) details are displayed on the PC screen and then, at the lower

left of the screen, Press <F2> to enter SETUP is shown.

(3)  At the press of <F2>, SETUP is activated and the Main menu appears.
(4)  Select Peripheral Configuration from the Advanced menu.
(5)  Select Parallel Mode and check the parallel port is set to Bi directional.
(6)  Press Esc to end the checking.

Содержание C7500n

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды