manualshive.com logo in svg

Oki C7500n, Руководство по обслуживанию

Поделиться
Скачать
Oki C7500n Скачать руководство пользователя страница 3

41955801TH  Rev.8

3 /

Oki  Data  CONFIDENTIAL

PREFACE

This manual describes the procedures of the maintenance of the C7550/C7350,C7500/C7300 of printers.

The document is produced for maintenance personnel use.  For details on the procedures for handling the
C7550/C7350,C7500/C7300 of printers, see its user documentation.

Note!

• The descriptions in this manual are subject to change without prior notice.
• In preparing the document, efforts have been made to ensure that the information in it is accurate.

However, errors may be crept into the document.  Oki Data assumes no responsibility for any
damage resulting from, or claimed to be the results of, those repairs, adjustments or modifica-
tions to the printers which are made by users using the manual.

• The parts used for the printers are sensitive and, if handled improperly, may be damaged.  It is

strongly recommended that the products are maintained by maintenance men registered with
Oki Data.

 

            

•

 Oki Data strongly recommends that you do NOT connect our LED page printers to an 

               uninterruptible Power Supply (UPS). For further information, please contact Oki Data directly at 
               800-OKIDATA or www.okidata.com.  

Содержание C7500n

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды