12
4. Check the color of the center circle
in the printout against the
surrounding circles:
• If the center circle matches the
circles labeled 00, the color
balance is okay. Skip to step 9.
• If the center circle does not
match circle 00, determine
which surrounding circle the
center circle most closely
matches and note its number.
5. Press VALUE (+ to increase #
value or - to decrease # value) until
COLOR BALANCE ADJUST
SELECT PATTERN #
displays, where # represents the
number determined in step 4.
6. Press SELECT.
The new value is engaged and a
new test pattern prints.
7. Check the pattern again and repeat
steps 4 through 6 until the color of
the center circle most closely
matches the circles labeled 00.
!
The color balance process is
subjective. It is unlikely that you
will get an exact match of the
center circle to the circles labeled
00. Repeat the color balance
process until you feel you have a
match, but no more than three
times.
9. Press ON LINE.
The printer goes back on line.
Color Balance Adjust
To set the Color Balance using the
front panel:
1. Press MENU repeatedly until
COLOR MENU displays.
2. Press ITEM + repeatedly until
COLOR BALANCE ADJUST
RESET TO DEFAULT
displays.
3. Press SELECT. This restores
factory balance settings, which
form a baseline for the adjustment.
The Color Balance test pattern
prints.
W
alk-Up Functions (cont.)