MENU FUNCTIONS > 71
MEDIA CHECK
ENABLE
DISABLE
Determines whether the printer check the
size of paper loaded matches that required
for the document sent to print.
RESOLUTION
600x1200DPI
600DPI
Sets the default resolution for printing (dots
per inch). 600x1200DPI uses more memory
and requires more time to process, but
prints at a higher quality.
TONER SAVE MODE
OFF
ON
Reduces the amount of toner used for
imaging. Toner saving gives lighter prints
but is more economical.
MONO-PRINT SPEED AUTO SPEED
AUTO SPEED
AUTO SPEED
AUTO SPEED
MONO 24PPM
COLOUR SPEED
MIXED SPEED
If the first page of a print job is black and
white, the printer runs at 20ppm (pages per
minute). When a colour page is detected the
printer slows down to 16ppm for the rest of
that job.
This setting operates in the same way as
AUTO SPEED, except that the printer runs at
24ppm until a colour page is detected. To
achieve this speed the printer requires an
additional 10 – 20 seconds to warm up and
30 –
60 seconds to cool down when
switching to 16ppm for colour pages. This
setting is therefore most appropriate when
the majority of print jobs are entirely black
and white.
The printer runs at 16ppm for all print jobs.
This setting is most appropriate when the
majority of print jobs are in colour.
The printer automatically switches between
16ppm for each colour page and 20ppm for
each black and white page. When black and
white pages are printed, the 3 colour drums
are automatically lifted to maximize their
working life. This operation imposes a 10 –
20 second delay each time the printer
switches between colour and black and
white printing. However, the 30 –
60 second
cool down delay described for MONO
24ppm is avoided by limiting mono speed
to 20ppm. This setting may be preferred for
mostly black and white printing with some
colour pages, or where most print jobs are
entirely colour or entirely black and white.
PRINT MENU
Item
Settings
Explanation
