Oki C5100n Скачать руководство пользователя

Страница: 16 / 81

LOADING PAPER > 16

MULTIPURPOSE TRAY

Open the multi purpose tray and press gently down on the
paper platform (1) to ensure it is latched down.

Load the paper and adjust the paper guides (2) to the size of
paper being used.

For single sided printing on headed paper load the
paper into the multipurpose tray with pre-printed side
up and top edge into the printer.

For two sided (duplex) printing on headed paper load
the paper with pre-printed side down and top edge
away from the printer. (Optional duplex unit must be
installed for this function.)

Envelopes should be loaded face up with top edge to
the left and short edge into the printer. Do not select
duplex printing on envelopes.

Do not exceed the paper capacity of about 50 sheets or
10 envelopes. Maximum stacking depth is 10mm.

Press the tray latch button (3) inwards to release the paper
platform, so that the paper is lifted and gripped in place.

Set the correct paper size for the multipurpose tray in the Media Menu
(see “Menu Functions”).

Содержание C5100n


















































































Результаты поиска

Содержание C5100n

Отзывы:

Похожие инструкции для C5100n

Бренды по названию

Популярные бренды

Oki C5100n, Руководство пользователя

Результаты поиска

Содержание C5100n

Отзывы:

Похожие инструкции для C5100n

Бренды по названию

Популярные бренды