Oki B6500 Series, Сетевое руководство

Страница: 29 / 62

B6500 Network Guide> 29
S
ETTING
U
P THE
W
ORKSTATION
This section explains the settings of Solaris 2.x workstation for
printing.
B
EFORE
S
ETUP
Before setting up the workstation, check the following:
• The setup procedures and commands may vary according
to different versions of OS. Refer to the manuals that
came with the workstation for details.
• To setup the printer, the user must be a superuser.
Contact your network administrator to perform the setup
if you do not have the authority of a superuser.
• Check the IP address set up for the printer in advance. Be
cautious as an incorrect IP address may cause severe
errors.
• Before performing any network setup (such as the IP
address) to a host running under NIS (Network
Information Service), consult the NIS administrator.
E
XAMPLES OF
S
ETTINGS FOR
S
OLARIS
2.X
The examples below show printer settings for Solaris 2.6 where the
printer host name is printer1.
1. Registering a printer (printer name: P001) supporting the
PostScript language
2. Registering a printer (printer name: P002) supporting the
PostScript language that feeds paper from an A4-size paper
tray for duplex printing
3. Registering a logical PostScript printer PS01 set using the
printer web page.
#lpadmin -p P001 -s printer1\!PS
#lpadmin -p P002 -s printer1\!PS A4_DUP
#lpadmin -p P003 -s printer1\!PS01