English
3
Customer Support Professionals: Latin America
Our customer support professionals are trained and certified on
all current OKI products. Make sure that you are close to your
printer when you call one of our OKI authorized service centers
so that you can describe your problem more accurately.
Customer support professionals can answer your questions
regarding:
•
Location of nearest Authorized Service Center
•
Installation of your machine
•
Usage/normal maintenance of your machine
•
Error message interpretation/solutions
•
Parts and supplies identification
•
Consumer relations
Product Identification and Use ______________
B6100 Black Toner, P/N 52113701
For more information, contact Oki Data at 2000 Bishops Gate
Blvd., Mount Laurel, NJ, 08054-4620.
Emergency Information: Call 1-800-654-3282; US & Canada
Only
Hazardous Ingredients _____________________
Styrene/acrylate copolymer (55-60% by weight)
CAS#: Not available
Iron oxide (35-40% by weight)
CAS#: Not available
Polypropylene (less than 3% by weight)
CAS#: Not available
Amorphous silica (less than 1% by weight)
CAS#: Not available
Chromium/azo dye complex (less than 1% by weight)
CAS#: 84179-66-8, 10-125-50-0, 109125-51-1
Physical Data ______________________________
Physical State: Solid
Melting/Freezing Point: Not available
Boiling Point: Not applicable
PH: Not available.
Vapor Pressure: Not applicable
Vapor Density (Air=1): Not available
Evaporation Rate (Butyl Acetate=1): Not available
Specific Gravity (H2O=1): Not available
Solubility in water: Negligible
Solubility in solvents: Not available
Coefficient of water/oil Distribution: Not available
Appearance and odor: Black powder, faint odor
Odor Threshold: Not available
Fire and Explosion Hazard Data _____________
Flammability: Not flammable under conditions of use.
Extinguishing Media: In case of fire, use extinguishing media
(water spray, foam, dry chemicals). When in a machine, treat as
an electrical fire.
Flash Point (OC): Not applicable
Lower Explosive Limit: Not applicable
Upper Explosive Limit: Not applicable
Auto-ignition Temperature: Not applicable
Hazardous Combustion Products: Not applicable
Explosion Data
Like most organic materials in powder form, it can form
explosive mixtures when dispersed in air.
Sensitivity to Mechanical Impact: Not available
Sensitivity to Static Discharge: Not available
Reactivity Data ____________________________
Stability: Stable
Conditions to Avoid: Not available
Polymerization: Not available
Hazardous Decomposition Products: Not available
Incompatibility: Not available
Toxicological Properties ____________________
Routes of Entry: Inhalation, Ingestion, Eyes, Skin
Effects of Acute Exposure: Practically non-toxic
Swallowed LD50 (rat): >5.0 g/kg
1
)
Skin LD50 (rabbit): >2.0 g/kg
1
)
Inhaled LC50 (rat): >5.0 mg/L/4hr
1
)
Effects of Chronic Exposure:
The results obtained from a sponsored, Chronic Toner Inhalation
Study, demonstrated no lung change in rats for the lowest (1 mg/
m
3
) exposure level (i.e. the level most relevant to potential
human exposure). A very slight degree of fibrosis was noted in
25% of the animals at the middle (4 mg/m
3
) exposure level,
while a slight degree of fibrosis was noted in all the animals at
the highest (16 mg/m
3
) exposure level. These findings are
attributed to "lung overloading", a generic response to excessive
amounts of any dust retained in the lungs for a prolonged period.
This study was conducted using a special test toner to comply
with EPA testing protocol. The test toner was ten times more
respirable than commercially available OKI toner, and would
not be functionally suitable for OKI equipment.
1
)
Exposure Limits:
ACGIH TLV (2002):
10 mg/m
3
(Total)
3 mg/m
3
(Respirable)
Irritancy: Not an irritant
1)
Material Safety Data Sheet
MSDS#58358601
