Oki B6100n, Руководство администратора

Страница: 23 / 106

Configuring Unix Printing Software on a Compaq Tru64 UNIX System
UNIX Printing Software Administration and Installation Guide 8/25/02 1-17
xs ya yd yj yp ys yt Da Dl It Lf Lu MI Nu Or Ot
Ps Sd Si Ss Ul Xf
12. Enter the symbol:
if
. Press RETURN .
13. Enter the following command. Press RETURN .
# /usr/sbin/sdriver -F [-Ixxx.xxx.xxx.xxx | -Pqueue] -pyyyy
[-L -d]
• where
xxx.xxx.xxx.xxx
is the IP address of the printer to which this queue
will send jobs.
• Printer name is the name of the printer as defined in
/etc/hosts
or
yp
or
DNS
.
Example:
/usr/sbin/sdriver -F -I10.10.114.40 -p6869 -L -d
Note:
The socket number used will vary from printer to printer. The release
notes for this product contains a list of socket numbers for supported
printers.
The following prompt appears:
Enter symbol name: mx
Note:
MX identifies the maximum number of bytes allowed to the spooler and
to the printer.
14. Enter
0
to allow unlimited bytes. Press RETURN .
The following prompt appears:
Is this correct [y]:
15. Enter y if the new information is correct.
16. The following prompt appears:
Enter symbol name:
17. Press q to quit
lprsetup
.
The following prompt appears:
Are these the final values for printer 20? [y]
18. Enter
y
if the values for printer 20 are final.
The following prompt appears:
Do you want to add comments to the printcap file [n]:
19. Press
n
followed by the RETURN key.