Oki B6100n, Руководство администратора

Страница: 17 / 106

Installation Prerequisites
UNIX Printing Software Administration and Installation Guide 8/25/02 1-11
# mount -r -t cdfs -o noversion -v /dev/rz4c /mycdrom
where
-r
is read only.
where
-t
is the file type
where
cdfs
is the CD-ROM file system.
where
-o
noversion invokes the skip version process.
where
-v
selects the device drive.
where
/dev/rz4c
is the CD-ROM device file.
where /
mycdrom
identifies the mounting point for the CD-ROM.
3. Once the command successfully executes, you can refer to the device by the
mount point, e.g., mycdrom.
Unarchiving .tar Files
There is a master .tar file (i.e.,
unprswxx.tar
) within your software kit that must be
unarchived. Inside the master .tar file is a set of individual .tar files that must also be
unarchived, as necessary, for each of the UNIX operating systems.
The .tar files maintained by
unprswxx.tar
include:
where xx is the version of the software kit.
• a dunix.tar for use with Compaq Tru64 UNIX systems.
• an hp9000_778.tar for use with HP/UX systems.
• linuxa.tar for use on a Alpha-based Linux system
• linuxi.tar for use on an Intel-based Linux system.
• an rs6000.tar for use with IBM/AIX systems.
• a sun4u.tar for use on SUN Solaris systems.
i
Once the software kit is in its temporary directory, you will need to untar the tar
File. Refer to the section,
“Unarchiving .tar Files” on page 1-11 of this guide.
i
Before unarchiving a .tar file, make sure that you are located in the temporary
directory into which you want to install the kit.