B400 Series Setup Guide
11
3
Click on the Device Options tab.
4
Click the Get Printer Settings bar. A list of
printer settings appears.
5
Click OK to activate the settings.
Activate Printer Options on a non-
Network Setup
1
Follow steps 1 to 3 above.
2
Check Lower Cassette.
3
Click OK to activate the settings.
Note: If optional memory is installed,
follow the installation instructions
provided with the memory card.
Configure Settings Using a Web
Browser (optional)
If you are working in a TCP/IP-enabled
environment, you can use a web browser to
display the printer or job printing status,
and to change settings on an embedded
web page.
1
Activate your web browser (Microsoft
Explorer
®/
™, Netscape Navigator™ 4.4
or higher, Mozilla
®
, Firefox
®
).
2
Enter the IP Address for the printer.
(Locate the address on the Print Menu
Map in the Network Menu.
3
When the web page appears, select from
the categories in the menu list.
Macintosh
®
The printer drivers support OS 10.2.8 and
above.
Connect the cable
See “Computer Connection” on page 6.
Note: Printer operation is not assured if
another USB compatible device is
connected concurrently with it.
Install the Printer Driver
1
Turn on the printer, then turn on the
computer.
2
Place CD in the CD-ROM drive.
3
Double-click the CD icon that appears on
the desktop.
4
Open the MAC folder.
5
Open the OSX folder.
6
Open the Driver Installer folder.
7
Open the Multilingual folder. The installer
will automatically install the language
selected in the OS.
8
Select PCL, or select PS (B430 only).
9
Follow the on-screen instructions.
Add the Printer
1
Run the Print Center or Print Setup
Utility.
2
Click Add.
3
Click More Printers.
4
Browse to select OKI USB, OKI TCP/IP or
Bonjour from the drop-down menu.
Note: If you are using USB, select OKI
USB and disregard step 3.
5
Enter the printer’s IP address (B410dn/
B420dn/B430dn models).
6
Quit the Print Center.
Содержание B410D
Страница 1: ......