1 WAN + 4 Ports Ethernet SOHO Router P 8
Chapter 2
Installation
Attaching the power cord into
PWR
inlet first and follow below sections to setup WAN/LAN connection.
2.1 Hardware Connection to WAN
Connect the network cable from the Cable/ DSL modem to the WAN port of the SOHO Router
(Figure 2-1)
. If
the Link/Act LED is always off, please check the power feeding and the connection cable between the
Cable/DSL modem and WAN port .
Figure 2-1 The hardware connection of WAN interface for SOHO Router.
2.2 Hardware Connection to LAN
Connect
the network cable from your computer’s Ethernet port to one of SOHO Router’s 4 LAN ports
(Figure
2-2).
If it is correctly connected, the responding Link/Act LED will be on.
Figure 2-2 The hardware connection of LAN interface for SOHO Router.
