1 WAN + 4 Ports Ethernet SOHO Router P 9
Since all the WAN and 4 LAN ports have the auto crossover capability. You could use the flat RJ-45 cable or
the crossover cable as you wish (please refer to the Appendix C for pin assignment).
Once both WAN/LAN are connected successfully, please hold down the reset button continuously for 5
seconds to make sure SOHO Router is on factory default condition now.
2.3 Network Setting in Administrator’s computer
In order to configure the router with a networked PC in LAN, it is necessary for administrator to have an
accurate network setting PC, then the communication between router and administrator‘s PC could be possible.
The following description assumes router is on factory default condition. (If not, please hold the reset button
down for more than 5 seconds). Router’s LAN IP will become
192.168.8.1
and the DHCP server for LAN user is
on (offered IP range from 192.168.8.
17
to 192.168.8.
128
by default).
Follow the procedures to set your computer as a DHCP Client. (If the fixed IP mode for administrator’s
computer is desired, please refer to Appendix D.)
Step1:
Click Start button, select Settings, and then choose Control Panel. Double click Network icon.
Choose configuration item. Select the TCP/IP protocol option, which is associated with your network
card/adapter. (To install TCP/IP protocol first.)
