background image

ENGLISH

ENGLISH

Chapter 6 

Child

ʼ

s bicycle seat OKBABY SIRIUS 

Page 67

Chapter 6 

Child

ʼ

s bicycle seat OKBABY SIRIUS 

Page 66

Instructions for use and assembly 

LIB006R06EU  Edition: 09-2007

Instructions for use and assembly 

LIB006R06EU  Edition: 09-2007

Figure 3:

Insert the support arm (5) pushing it into 
the correct position (25).

Figure 4:

Insert the fastening plate (12) pushing 
it as far as possible and then hook it on 
using the safety tab (26) over wall 27 as 
seen in the diagram.

Figure 5:

Screw on the fixing bridge (13)

DANGER!

 If you do not screw on the 

fixing bridge correctly, the support arm 
may disconnect and unbalance the person 
riding the bicycle.

25

27

26

3

3

4

4

5

4x

8

7

17 10

11

Figure 6:

Check the diameter of the frame and 
choose the most suitable plastic adaptor 
(10). The reference diameter is indicated 
on each adaptor. Fix the fastening block 
(8) and the fastening counter-block (7) in 
place, placing the plastic adaptor (10) and 
the soft plastic reducer (17) in between 
them. The plastic adaptor (10) has specific 
grooves to hold the cable glands welded 
to the frame and the cables. Do not tigh-
ten the fastener screws completely so you 
can adjust the vertical position of the child 
seat; when the height is right, tighten the 
screws firmly in place.

WARNING! 

Do not tighten the screws 

excessively as this could break the faste-
ning block.

Figure 7:

Take the seat and insert the two ends of 
the support arm (5) into the fastening 
block holes.

DANGER! 

Pull the support arm 

upwards to check that the child seat is 
firmly in place and held by the fastening 
block.

Place the backrest upright using the knob 
(16) (see figure 2) rotating it in an anti-
clockwise direction. Now check that:
-  the barycentre reference point (19) on 
the seat is not over 10 mm from the cen-
tre of the wheel.
-  the child seat is at least 6-7 cm from 
the mudguard, from the wheel or from any 
luggage racks.
If the child seat barycentre reference is 
not between the set parameters, adjust the 
horizontal position as follows:

MAX 

10 cm

5

20

17

19

6-7 cm

6

7

Содержание SIRIUS








Отзывы: