If you wish to use handheld microphone EJ-701TM+ and bodypack transmitter EJ-7XT+
at the same time, it's important to set the system in a specific order. The sensitivity for
EJ-701TM+ is deliberately low compared to EJ-7XT+, to enable use of the microphone
in front of a speaker without setting off feedback. To connect the receiver and the
transmitters with a hearing loop amplifier, please follow instructions.
11
Instructions for using transmitter/receiver system
with hearing loop amplifier
Set the system:
Handheld microphone EJ-701TM+
1. Set sensitivity on EJ-701TM+ to ”HI”.
2. Set level/volume on corresponding receiver to max.
Adjust the output signal (loop current) on the loop amplifier according to
standard (0dB at peaks)
Adjust the input signal on the loop amplifier until the ”IN” indicator lits up.
The input signal is now sufficient to activate the AGC. Do not adjust more than
necessary, as it might distort the signal.
3.
4.
5.
6.
7.
8.
The chain: transmitter receiver loop amplifier input loop amplifier output
is now adjusted to EJ-701TM+.
Bodypack transmitter EJ-7XT+
Set sensitivity switch on EJ-7XT+ to ”LOW”.
Set level/volume in corresponding receiver to vertical position (12 o'clock).
If the level in the loop is perceived as low, adjust level on the receiver. If still
not sufficient, change sensitivity switch on transmitter to ”MID”.
